Extrutech Plastics, Inc. - Demountable Wall System (PVC)

Unit of Measure

Items	EPI9000 EPI9000 Wall Panel Request Quote	EPI0200 H-Bar Mullion Request Quote	SS U-Channel Stainless Base Channel Request Quote	EPI1090 90 Degree Dovetail Corner Request Quote	EPI0100 Rigid U-Channel Request Quote
Description	N/A Extrutech Plastics 36" x 1 3/4" Panel Item# EPI9000 is a multi-chamber interlocking wall panel designed for use in all environments where a durable, moisture proof partition wall or enclosure is required. Just like our attractive wall and ceiling panels, we custom extrude these panels to your specifications - cut to the inch from 4' to 20' lengths, with no wasted materials, installed quickly and easily with our accompanying trims. The panel is divided into thirty-six 1" x 1 3/4" chambers. Each chamber runs the length of the panel with an external wall thickness of 0.070" and an internal wall thickness of 0.030". In addition, the panels can be insulated and or reinforced for additional structure support. The EPI9000 panels have a Class C fire rated, are available in white, beige, gray and weight of 1.75 lbs per sq ft. (Additional Specifications), (Additional Information) (Video - Dovetail Partition Walls)	N/A Extrutech 1 3/4" H-Bar Mullion, Item # EPI0200, is one of two options used to connect two 36" EPI9000 wall panels together along the side dovetail edges. The 1 3/4" H-Bar Mullion is slid over the side of the dovetail edge of the standing panel where vertical assemble clearance is tight and the next panel is slid into the installed H-Bar and joined together. Is of an exterior grade, hard, dense, rigged pvc, with a smooth surface, with 070" wall thickness. Cut with standard power saw and a fine tooth blade. Fasten with appropriate trim screws per installation instructions or industry standard. This product is non-painted in white, available at 2' increments from 4'- 16' foot lengths, with a weight of 0.30 lbs per foot.	N/A Extrutech 1 3/4" SS U-Channel, Item # SS U-Channel, is used as a base channel, cap channel or perimeter trim of the standing EPI9000 wall panel, for the Extrutech demountable partition wall system. 18 gage, smooth surface 304 stainless steel, with 045" wall thickness. Cut with metal cutting chop saw and cutoff wheel, remove any sharp edges before assemble. Fasten with appropriate screws or anchors per installation instructions or industry standard. This product is non-painted, non-coated, Stainless Steel, available at 10' foot lengths, with a weight of 2 lbs per foot.	N/A Extrutech 2 1/2" Corner Connector, Item # EPI1090, used as one of two corner options of the demountable partition wall system. This dovetail corner is slid down the dovetail edge of the standing EPI9000 wall panels where vertical assemble clearance is not an issue. Is of an exterior grade, hard, dense, rigged pvc, with a smooth surface and 070" wall thickness. Cut with standard power saw and a fine tooth blade. Fasten with appropriate trim screws and construction adhesive per installation instructions or industry standard. This product is non-painted in white, available at 2' increments from 4' - 16' foot lengths, with a weight of 0.65 lbs per foot.	N/A Extrutech 1 3/4" Rigid U-Channel, Item # EPI0100, is used as a base channel, cap channel or perimeter trim of the standing EPI9000 wall panel, for the Extrutech demountable partition wall system. Is of an exterior grade, hard, dense, rigged pvc, with a smooth surface, with 070" wall thickness. Cut with standard power saw and a fine tooth blade. Fasten with appropriate trim screws per installation instructions or industry standard. This product is non-painted in white, available at 2' increments from 4' - 16' foot lengths, with a weight of 0.25 lbs per foot.
Material	N/A Rigid Virgin Polymer	N/A Rigid Virgin Polymer	N/A Stainless Steel	N/A Rigid Virgin Polymer	N/A Rigid Virgin Polymer
Thickness	N/A 1.75 Inch	N/A 0.070 Inch	N/A 0.045 Inch	N/A 1.75 Inch	N/A 0.070 Inch
Width	N/A 36 Inch	N/A 2 Inch	N/A 1.75 Inch	N/A 2.5 Inch	N/A 1.75 Inch
Weight	N/A 1.75 lb/ft	N/A 0.30 lb/ft	N/A 2 lb/ft	N/A	N/A 0.25 lb/ft
Color¹	N/A Beige Gray White	N/A White	N/A Stainless Steel	N/A White	N/A White
Available Lengths	N/A 4 to 20 ftCut to the Inch	N/A 10 ft12 ft14 ft16 ft4 ft6 ft8 ftCut to the Inch	N/A 10 ftCut to the Inch	N/A 4 to 20 ftCut to the Inch	N/A 10 ft12 ft14 ft16 ft4 ft6 ft8 ftCut to the Inch
Features	N/A Durable Impact Resistant Lightweight Low Maintenance Mildew Resistant Moisture Proof Never Needs Paint Will Not Rot Will Not Rust Will Not Warp	N/A Durable Impact Resistant Lightweight Low Maintenance Mildew Resistant Moisture Proof Never Needs Paint Will Not Rot Will Not Rust Will Not Warp	N/A Impact Resistant Low Maintenance Mildew Resistant Moisture Proof Never Needs Paint Will Not Rot Will Not Rust	N/A Durable Impact Resistant Lightweight Low Maintenance Mildew Resistant Moisture Proof Never Needs Paint Will Not Rot Will Not Rust Will Not Warp	N/A Durable Impact Resistant Lightweight Low Maintenance Mildew Resistant Moisture Proof Never Needs Paint Will Not Rot Will Not Rust Will Not Warp
Panel Design	N/A Dovetail	N/A	N/A	N/A Dovetail	N/A
Interior Chamber Length	N/A 1 Inch	N/A	N/A	N/A	N/A
Interior Chamber Width	N/A 1.75 Inch	N/A	N/A	N/A	N/A
Chamber Exterior Wall Thickness	N/A 0.07 Inch	N/A	N/A	N/A	N/A
Chamber Interior Wall Thickness	N/A 0.03 Inch	N/A	N/A	N/A	N/A
Warranty	N/A 10 y
Standards	N/A ASTM D3273 ASTM D3274 ASTM E-84-05 Can/ULC S102.2-03	N/A ASTM D3273 ASTM D3274	N/A ASTM D3273 ASTM D3274 ASTM E-84-05 Can/ULC S102.2-03	N/A ASTM D3273 ASTM D3274 ASTM E-84-05 Can/ULC S102.2-03	N/A ASTM D3273 ASTM D3274
Facilities Served	N/A Agriculture Facilities Animal Enclosures Car Washes Clean Rooms Dairies Equipment Room Food Processing Laboratories Office Area Product Testing Enclosure	N/A Agriculture Facilities Beverage Plants Car Washes Chemical Plants Dairies Food Processing	N/A Agriculture Facilities Animal Enclosures Car Washes Clean Rooms Dairies Equipment Room Food Processing Laboratories Office Area Product Testing Enclosure	N/A Agriculture Facilities Animal Enclosures Car Washes Clean Rooms Dairies Equipment Room Food Processing Laboratories Office Area Product Testing Enclosure	N/A Agriculture Facilities Beverage Plants Car Washes Chemical Plants Dairies Food Processing
Installation Overview	N/A Attach Channel to Floor Connect Wall Panels with H-Channel Place Panel into U-Channel
Additional Information	N/A EPI’s 36" x 1 3/4" EPI9000 multi-chamber interlocking wall panel is designed for use in all environments where a durable, moisture proof partition wall or enclosure is required. Just like our attractive wall and ceiling panels, we custom extrude these panels to your specifications - up to 20' in length. No wasted materials and they install quickly and easily with our accompanying trims. The panel is divided into thirty-six 1" x 1 3/4" chambers. Each chamber runs the length of the panel with an external wall thickness of 0.070” and an internal wall thickness of 0.030". In addition, the panels can be insulated and or reinforced for additional structure support. The EPI9000 panels are not fire rated. Durable, strong 36" x 1 3/4" multi-chamber, interlocking wall panels made of rigid, virgin polymers Easy assembly, all parts pre-cut Finish surface on both sides of the panel, never needs painting. Moisture and rot proof, mildew resistant Low maintenance, easy to clean, just spray off with water/cleaner Termite resistant Will not rust Brightens the interior of any building Light-weight, low shipping cost Custom sizes and insulated panels available Available in a bright White color
¹ A 20% charge will be added for custom cuts, and /or colors. Volume discounts are available.