Call us Today: 888.818.0118
Extrutech 1 3/4" SS U-Channel, Item # SS U-Channel, is used as a base channel, cap channel or perimeter trim of the standing EPI9000 wall panel, for the Extrutech demountable partition wall system. 18 gage, smooth surface 304 stainless steel, with 045" wall thickness. Cut with metal cutting chop saw and cutoff wheel, remove any sharp edges before assemble. Fasten with appropriate screws or anchors per installation instructions or industry standard. This product is non-painted, non-coated, Stainless Steel, available at 10' foot lengths, with a weight of 2 lbs per foot.
Unit of Measure

Specifications

Material

N/A Stainless Steel

Thickness

N/A 0.045 Inch

Width

N/A 1.75 Inch

Weight

N/A 2 lb/ft
Color1 N/A Stainless Steel

Available Lengths

N/A 10 ftCut to the Inch

Features

N/A Impact Resistant Low Maintenance Mildew Resistant Moisture Proof Never Needs Paint Will Not Rot Will Not Rust

Warranty

N/A 10 y

Standards

N/A ASTM D3273 ASTM D3274 ASTM E-84-05 Can/ULC S102.2-03

Facilities Served

N/A Agriculture Facilities Animal Enclosures Car Washes Clean Rooms Dairies Equipment Room Food Processing Laboratories Office Area Product Testing Enclosure

Installation Overview

N/A
Attach Channel to Floor

Place Panel into U-Channel

Connect Wall Panels with H-Channel

Additional Information

Additional Information

N/A EPI’s 36" x 1 3/4" EPI9000 multi-chamber interlocking wall panel is designed for use in all environments where a durable, moisture proof partition wall or enclosure is required. Just like our attractive wall and ceiling panels, we custom extrude these panels to your specifications - up to 20' in length. No wasted materials and they install quickly and easily with our accompanying trims. The panel is divided into thirty-six 1" x 1 3/4" chambers. Each chamber runs the length of the panel with an external wall thickness of 0.070” and an internal wall thickness of 0.030". In addition, the panels can be insulated and or reinforced for additional structure support. The EPI9000 panels are not fire rated.
  • Durable, strong 36" x 1 3/4" multi-chamber, interlocking wall panels made of rigid, virgin polymers
  • Easy assembly, all parts pre-cut
  • Finish surface on both sides of the panel, never needs painting.
  • Moisture and rot proof, mildew resistant
  • Low maintenance, easy to clean, just spray off with water/cleaner
  • Termite resistant
  • Will not rust
  • Brightens the interior of any building
  • Light-weight, low shipping cost
  • Custom sizes and insulated panels available
  • Available in a bright White color
  • 1 A 20% charge will be added for custom cuts, and /or colors. Volume discounts are available.
^