Call us Today: 888.818.0118
Extrutech 1 3/4" H-Bar Mullion, Item # EPI0200, is one of two options used to connect two 36" EPI9000 wall panels together along the side dovetail edges. The 1 3/4" H-Bar Mullion is slid over the side of the dovetail edge of the standing panel where vertical assemble clearance is tight and the next panel is slid into the installed H-Bar and joined together. Is of an exterior grade, hard, dense, rigged pvc, with a smooth surface, with 070" wall thickness. Cut with standard power saw and a fine tooth blade. Fasten with appropriate trim screws per installation instructions or industry standard. This product is non-painted in white, available at 2' increments from 4'- 16' foot lengths, with a weight of 0.30 lbs per foot.
Unit of Measure

Specifications

Material

N/A Rigid Virgin Polymer

Thickness

N/A 0.070 Inch

Width

N/A 2 Inch

Weight

N/A 0.30 lb/ft
Color1 N/A White

Available Lengths

N/A 10 ft12 ft14 ft16 ft4 ft6 ft8 ftCut to the Inch

Features

N/A Durable Impact Resistant Lightweight Low Maintenance Mildew Resistant Moisture Proof Never Needs Paint Will Not Rot Will Not Rust Will Not Warp

Warranty

N/A 10 y

Standards

N/A ASTM D3273 ASTM D3274

Facilities Served

N/A Agriculture Facilities Beverage Plants Car Washes Chemical Plants Dairies Food Processing

Installation Overview

N/A
Attach Channel to Floor

Place Panel into U-Channel

Connect Wall Panels with H-Channel

Additional Information

Additional Information

N/A EPI’s 36" x 1 3/4" EPI9000 multi-chamber interlocking wall panel is designed for use in all environments where a durable, moisture proof partition wall or enclosure is required. Just like our attractive wall and ceiling panels, we custom extrude these panels to your specifications - up to 20' in length. No wasted materials and they install quickly and easily with our accompanying trims. The panel is divided into thirty-six 1" x 1 3/4" chambers. Each chamber runs the length of the panel with an external wall thickness of 0.070” and an internal wall thickness of 0.030". In addition, the panels can be insulated and or reinforced for additional structure support. The EPI9000 panels are not fire rated.
  • Durable, strong 36" x 1 3/4" multi-chamber, interlocking wall panels made of rigid, virgin polymers
  • Easy assembly, all parts pre-cut
  • Finish surface on both sides of the panel, never needs painting.
  • Moisture and rot proof, mildew resistant
  • Low maintenance, easy to clean, just spray off with water/cleaner
  • Termite resistant
  • Will not rust
  • Brightens the interior of any building
  • Light-weight, low shipping cost
  • Custom sizes and insulated panels available
  • Available in a bright White color
  • 1 A 20% charge will be added for custom cuts, and /or colors. Volume discounts are available.
^