Call us Today: 888.818.0118
  • P1300 Colored Liner Panels

    These highly-reflective engineered polymer liner panels are ideal for high-moisture areas because they are water-proof! Panels install quickly and easily, with no exposed fasteners. Available in widths of 12, 16 and 24-inches and cut to inch lengths from 4 to 20 feet, to fit your building. These interlocking wall and ceiling liner panels are stain-resistant, low-maintenance and easy to clean (when required). Use in self-serves, automatics and tunnels. Available colored panels should be used for interiors only.

  • Bullnose Outside Corner Trim

    Extrutech Plastics provides a number of high quality panel trims that give your project a clean finished look. To view these trim options click on the photo or blue high-lighted text. Trims are available with a non-painted finish in 8', 10'.12', 14', 16' foot lengths, color matched to requested panels, Cut with standard power saw and a fine tooth blade. Fasten with appropriate trim or truss head screws and construction adhesive per installation instructions or industry standard.

  • P824 FORM Panel ICC Listed

    Extrutech FORM System is a "stay-in-place" concrete form for poured structural walls. Is a quick setup, pre-cut system, that provides a smooth, non-pourous, easy-to-clean, finished concrete structural wall. Ideal for high moisture areas were sanitation is critical; making the Extrutech FORM system a labor saver for both the contractor and the owner. This durable, long lasting system is designed for ease of construction, sanitation and maintenance. Is made up of snap together, two foot wide panels, with cut to the inch lengths, that makes for quick installation. This concrete wall FORM system offers a non-porous, prefinished, bright white surface on both sides, reducing finishing and installation time while providing an easy to clean sanitary solid structural wall.

  • P224 2 1/4 x 24 Inch Wide Partition Wall Panels

    The Extrutech P224 Partition Wall Panel is a rigid 2 1/4" thick by 24" wide, smooth wall panel; with a bright white, glossy surface on both sides that provides that fresh, clean appearance. This waterproof panel, will never rust, rot, corrode or fade. The panel is easy to clean and ideal for corrosive or high moisture areas where daily sanitation is critical, and can also be used for general moisture and dust control, or used to limit area access reducing cross contamination. (Specifications)

  • EPI9000 36 x 1 3/4 Inch Partition Wall Panels

    Extrutech Plastics 36 x 1 3/4" Panel Item# EPI9000 is a multi-chamber interlocking wall panel designed for use in all environments where a durable, moisture proof partition wall or enclosure is required. To view panel options click the photo or blue high-lighted text. Just like our attractive wall and ceiling panels, we custom extrude these panels to your specifications - Cut to the inch from 4' to 20' lengths, with no wasted materials, installed quickly and easily with our accompanying trims. The panel is divided into thirty-six 1" x 1 3/4" chambers. Each chamber runs the length of the panel with an external wall thickness of 0.070" and an internal wall thickness of 0.030". In addition, the panels can be insulated and or reinforced for additional structure support. The EPI9000 panels have a Class C fire rated, See Product Specifications for more information."

  • Extru-Brite Panel Cleaner

    To give your project that sharp professional  finished look, Extrutech Plastics recommends or can provide products that will aid with installation of panels, trims, and mounting hardware. Provide adhesives and joint fillers for around edges and behind panels or trims. Provide fasteners for securing panels & trims; and cleaners to keep your panels looking good for years.