The Extrutech 45 Degree J-Trim (Item# P0145 ) provides a quick, attractive way to give your project a clean, finished look at 45 degree inside corners and vaulted ceilings.
The 45 Degree J-Trim has an overall width of 2 5/16" and nice wide nailing fins. With 3/4" coverage for each side of our 1/2 thick liner panels. The trim is available in 8' Foot and 16' Foot lengths.
Extrutech Plastic's 45 Degree J-Trim is made of an exterior grade, hard, dense, rigid polymer, with a smooth surface for easy cleaning.
Trim can be cut with a standard power miter saw using a fine-tooth blade. Fasten with truss-head screws 16" to 24" on-center and as required with silicone caulk per installation instructions and industry standards.
The 45 Degree J-Trim has an overall width of 2 5/16" and nice wide nailing fins. With 3/4" coverage for each side of our 1/2 thick liner panels. The trim is available in 8' Foot and 16' Foot lengths.
Extrutech Plastic's 45 Degree J-Trim is made of an exterior grade, hard, dense, rigid polymer, with a smooth surface for easy cleaning.
Trim can be cut with a standard power miter saw using a fine-tooth blade. Fasten with truss-head screws 16" to 24" on-center and as required with silicone caulk per installation instructions and industry standards.
