Extrutech Plastics, Inc. - P224 2 1/4 x 24 Inch Wide Partition Wall Panels

Plastic Wall & Ceiling Panel Manufacturing since 1992

– – – – Call for “Special Pricing” – – – – White Stock Panels Available – – – – “Job Opportunities” – – – –

The Extrutech P224 Partition Wall Panel is a rigid 2 1/4" thick by 24" wide, smooth wall panel; with a bright white, glossy surface on both sides that provides that fresh, clean appearance. This waterproof panel, will never rust, rot, corrode or fade. The panel is easy to clean and ideal for corrosive or high moisture areas where daily sanitation is critical, and can also be used for general moisture and dust control, or used to limit area access reducing cross contamination. (Specifications)

Request Information

Unit of Measure

Items	P224 2 1/4"x 24" Partition Wall Panel Request Quote	EPI012516 2 1/4 Inch Rigid U-Channel Request Quote	P022516 2 1/4 Inch Fitted Corner Request Quote	P022618 2 1/4 Inch Slip-On Corner Request Quote	P0227 2 1/4 Inch Flex U-Channel Request Quote
Description	N/A The Extrutech P224 Partition Wall Panel has a smooth bright white glossy surface on both sides that provides that fresh clean appearance. This is a waterproof panel, that will never rust, rot, corrode or fade. The panel is easy to clean and ideal for corrosive, or high moisture areas where daily sanitation is critical, and can also be used for general moisture and dust control, or used to limit area access reducing cross contamination. (Specifications) (Video Page) (Details) The P224 Partition Wall Panel allows numerous design options. A wall thicknes of 2 1/4" which allows for an insulation option that provides a (R-10). Cut to the inch panel lengths or based on your requirements, with door and window cut-out options. This user friendly panel also allows for easy field cuts if needed and its tongue and groove design makes makes for quick installation. Extrutech Partition Wall Panel System (Item# P224) is 24" wide by 2 1/4" thick, 4lbs/LnFt, with a tongue and groove design. The panel has an exterior wall thickness of .110", multi-chamber interior running the length of the tongue & groove panel. Made of USA 100% virgin, exterior-grade PVC, that will not support mold or mildew per ASTM D3273 and D3274. CSI Master Format 06600 (06 64 00) and NSF/ANSI 51 listed material of cleanability requirments for food equipment material.	N/A Extrutech 2 1/4" Rigid U-Channel, Item # EPI012516, is used as a base channel, cap channel or perimeter trim for the P224 Partition Wall Panel, and Extrutech Partition Wall System. Is of an exterior grade, hard, dense, rigid pvc, with a smooth surface, and 0.065" wall thickness. Cut with standard power saw and a fine tooth blade. Fasten with appropriate anchor and trim screws per installation instructions or industry standard. This product is non-painted in white, available at 8' and 16' foot lengths, with a weight of 0.25 lbs per foot.	N/A Extrutech 2 1/4" Fitted Corner, Item # P022516, used as a corner option of the Extrutech Partition Wall System. This corner trim allows the corner to be slipped over the sides of cut panels for set wall widths. Is of an exterior grade, hard, dense, rigid pvc, with a smooth surface, and has a 0.65" wall thickness. Cut with standard power saw and a fine tooth blade. Fasten with appropriate trim screws and construction adhesive per installation instructions or industry standard. This product is non-painted, available in white, at 8' and 16' foot lengths, with a weight of 0.4 lbs per foot.	N/A Extrutech 2 1/4" Slip-on Corner, Item # P022618, is used as one of two corner options of the Extrutech Partition Wall System. This corner trim allows the corner to be slipped over the sides of standing panels where clearances are tight. Is of an exterior grade, hard, dense, rigid pvc, with a smooth surface, and has a 0.65" wall thickness. Cut with standard power saw and a fine tooth blade. Fasten with appropriate trim screws and construction adhesive per installation instructions or industry standard. This product is non-painted, available in white, at 9' and 18' foot lengths, with a weight of 0.4 lbs per foot.	N/A Extrutech 2 1/4" Flex U-Channel, Item # P022716, is used as a base channel, cap channel or perimeter trim for the P224 Partition Wall Panel, and Extrutech Partition Wall System. Is of an exterior grade, hard, dense, rigged pvc, with a smooth surface, and 0.065" wall thickness. Cut with standard power saw and a fine tooth blade. Fasten with appropriate anchor and trim screws per installation instructions or industry standard. This product is non-painted in white, available at 8' and 16' foot lengths, with a weight of 0.25 lbs per foot.
Width	N/A 24 Inch	N/A 2.25 Inch	N/A 2.25 Inch	N/A 2.25 Inch	N/A 2.25 Inch
Panel Design	N/A Flat Tongue & Groove	N/A Rigid U-Channel	N/A Fitted Corner Trim	N/A Slip-On Corner	N/A
Available Lengths	N/A 4 to 20 ftCut to the Inch	N/A 16 ft8 ftCut to the Inch	N/A 16 ft8 ftCut to the Inch	N/A 18 ft9 ftCut to the Inch	N/A 16 ft8 ft
Color¹	N/A White
Weight	N/A 4 lb/ft	N/A 0.25 lb/ft	N/A 0.40 lb/ft	N/A 0.40 lb/ft	N/A 0.25 lb/ft
Thickness	N/A 2.25 Inch	N/A 0.065 Inch	N/A 0.065 Inch	N/A 0.065 Inch	N/A 0.065 Inch
Additional Information	N/A	N/A The P224 Partition Wall Panel allows numerous design options. A wall thickness of 2 1/4" which allows for an insulation option that provides a (R-10). Cut to the inch panel lengths or based on your requirements, with door and window cut-out options. This user friendly panel also allows for easy field cuts if needed and its tongue and groove design makes for quick installation.	N/A The P224 Partition Wall Panel allows numerous design options. A wall thickness of 2 1/4" which allows for an insulation option that provides a (R-10). Cut to the inch panel lengths or based on your requirements, with door and window cut-out options. This user friendly panel also allows for easy field cuts if needed and its tongue and groove design makes for quick installation.	N/A The P224 Partition Wall Panel allows numerous design options. A wall thickness of 2 1/4" which allows for an insulation option that provides a (R-10). Cut to the inch panel lengths or based on your requirements, with door and window cut-out options. This user friendly panel also allows for easy field cuts if needed and its tongue and groove design makes for quick installation.	N/A
¹ A 20% charge will be added for custom cuts, and /or colors. Volume discounts are available.