Extrutech Plastics, Inc. - EPI9000 36 x 1 3/4 Inch Partition Wall Panel Trims

Unit of Measure

Items	EPI1095 Outside Corner Request Quote	EPI0110 Flex U-Channel Request Quote	EPI0300 Flat Edge Cap Request Quote	EX1020 Mullion Cap Insert Request Quote	EPI0200 H-Bar Mullion Request Quote
Description	N/A Extrutech 1 3/4" Outside Corner, Item # EPI1095, used as one of two corner options of the Extrutech demountable partition wall system. This corner trim allows the corner to be slipped over the sides of standing panels where clearances are tight. Is of an exterior grade, hard, dense, rigged pvc, with a smooth surface, with 0.070" wall thickness. Cut with standard power saw and a fine tooth blade. Fasten with appropriate trim screws and construction adhesive per installation instructions or industry standard. This product is non-painted, available in white, at 2' increments from 4' - 16' foot lengths, with a weight of 0.4 lbs per foot.	N/A Extrutech 1 3/4" Flex U-Channel, Item # EPI0110, is used as the cap channel along the top of the standing EPI9000 wall panel or as the side edge trim, where clearances are tight. The 1 3/4" Flex U-Channel has one flexible leg that allows the EPI9000 wall panel to be tipped up into place and secured by folding the EPI0110 flexible leg down over the panels' top edge and securing in place with a mechanical fastener. The EPI0110 is an exterior grade, hard, dense, rigged pvc, with a smooth surface, and a 0.070" wall thickness. Cut with standard power saw and a fine tooth blade. Fasten with appropriate trim screws or construction adhesive per installation instructions or industry standard. This product is non-painted available in white, at 2' increments from 4'- 16' foot lengths, with a weight of 0.25 lbs per foot.	N/A Extrutech 1 3/4" Flat Edge Cap, Item # EPI0300, is a 1 3/4" wide dovetailed edge trim option that provides a finished, flat, smooth, face for the 1 3/4" side of the EPI9000 wall panel. Is of an exterior grade, hard, dense, rigged pvc, with a smooth surface, with 0.050" wall thickness. Cut with standard power saw and a fine tooth blade. Fasten with appropriate trim screws or construction adhesive per installation instructions or industry standard. This product is non-painted in white, available at 2' increments from 4'- 16' foot lengths, with a weight of 0.15 lbs per foot.	N/A Extrutech 1 3/4" Mullion Cap Insert, Item # EX1020, is a panel insert for fastener locations as needed for requirements of application, may be inserted in any of the 34 chambers as needed. Is of an exterior grade, hard, dense, foamed pvc, with a smooth surface. Cut with standard power saw and a fine tooth blade. Fasten with appropriate trim screws per installation instructions. This product is non-painted in available in white, at 2' increments from 4'- 16' foot lengths, with a weight of 0.35 lbs per foot.	N/A Extrutech 1 3/4" H-Bar Mullion, Item # EPI0200, is one of two options used to connect two 36" EPI9000 wall panels together along the side dovetail edges. The 1 3/4" H-Bar Mullion is slid over the side of the dovetail edge of the standing panel where vertical assemble clearance is tight and the next panel is slid into the installed H-Bar and joined together. Is of an exterior grade, hard, dense, rigged pvc, with a smooth surface, with 070" wall thickness. Cut with standard power saw and a fine tooth blade. Fasten with appropriate trim screws per installation instructions or industry standard. This product is non-painted in white, available at 2' increments from 4'- 16' foot lengths, with a weight of 0.30 lbs per foot.
Material	N/A Polyvinyl Chloride (PVC)	N/A Polyvinyl Chloride (PVC)	N/A Polyvinyl Chloride (PVC)	N/A Polyvinyl Chloride (PVC)	N/A Rigid Virgin Polymer
Color¹	N/A White	N/A White	N/A Beige Gray White	N/A White	N/A White
Available Lengths	N/A 10 ft12 ft14 ft16 ft4 ft6 ft8 ft
Features	N/A	N/A Durable Impact Resistant Lightweight Low Maintenance Mildew Resistant Moisture Proof	N/A Durable Lightweight Mildew Resistant Moisture Proof Never Needs Paint	N/A Durable Low Maintenance Mildew Resistant Moisture Proof	N/A Durable Impact Resistant Lightweight Low Maintenance Mildew Resistant Moisture Proof Never Needs Paint Will Not Rot Will Not Rust Will Not Warp
Warranty	N/A	N/A 10 y	N/A 10 y	N/A 10 y	N/A 10 y
Standards	N/A ASTM D3273 ASTM D3274
Facilities Served	N/A Agriculture Facilities Beverage Plants Car Washes Chemical Plants Dairies Food Processing
¹ A 20% charge will be added for custom cuts, and /or colors. Volume discounts are available.