Extrutech Plastics, Inc.
5902 West Custer St.
Manitowoc, WI 54220
Phone: 920.684.9650
Fax: 920.684.4344
E-mail: info@epiplastics.com
Website:www.epiplastics.com
All Categories > Clean Rooms, Enclosure Modules, and Partition Walls > Demountable Wall System (PVC) > Item # EPI1020-B  


2 Inch Panel Connector

larger image

Item # EPI1020-B, 2 Inch Panel Connector

Extrutech 1 3/4" x 2" Panel Connector, Item # EPI1020, is one of two options used to connect two 36" EPI9000 wall panels together along the side dovetail edges. The 2" Panel Connector is slid down the dovetail edge of the standing panels where vertical assemble clearance is not an issue. Is of an exterior grade, hard, dense, rigged pvc, with a smooth surface, with 070" wall thickness. Cut with standard power saw and a fine tooth blade. Fasten with appropriate trim screws per installation instructions or industry standard. This product is non-painted in white, available at 2' increments from 4' - 16' foot lengths, with a weight of 0.55 lbs per foot.





Specifications  · Additional Information

Specifications

Material
Rigid Virgin Polymer

Thickness
1.75 Inch

Width
2 Inch

Weight
0.55 lb/ft

Color1
Beige
White

Available Lengths
4 to 20 ft
Cut to the Inch

Features
Durable
Impact Resistant
Lightweight
Low Maintenance
Mildew Resistant
Moisture Proof
Never Needs Paint
Will Not Rot
Will Not Rust
Will Not Warp

Panel Design
Dovetail

Warranty
10 y

Standards
ASTM D3273
ASTM D3274

Facilities Served
Agriculture Facilities
Animal Enclosures
Beverage Plants
Car Washes
Chemical Plants
Clean Rooms
Concession Areas
Dairies
Equipment Room
Fisheries
Food Processing
Kennels
Office Area
Product Testing Enclosure

Installation Overview
1 A 20% charge will be added for custom cuts, and /or colors. Volume discounts are available.


Additional Information
EPI’s 36" x 1 3/4" EPI9000 multi-chamber interlocking wall panel is designed for use in all environments where a durable, moisture proof partition wall or enclosure is required. Just like our attractive wall and ceiling panels, we custom extrude these panels to your specifications - up to 20' in length. No wasted materials and they install quickly and easily with our accompanying trims. The panel is divided into thirty-six 1" x 1 3/4" chambers. Each chamber runs the length of the panel with an external wall thickness of 0.070” and an internal wall thickness of 0.030". In addition, the panels can be insulated and or reinforced for additional structure support. The EPI9000 panels are not fire rated.
  • Durable, strong 36" x 1 3/4" multi-chamber, interlocking wall panels made of rigid, virgin polymers
  • Easy assembly, all parts pre-cut
  • Finish surface on both sides of the panel, never needs painting.
  • Moisture and rot proof, mildew resistant
  • Low maintenance, easy to clean, just spray off with water/cleaner
  • Termite resistant
  • Will not rust
  • Brightens the interior of any building
  • Light-weight, low shipping cost
  • Custom sizes and insulated panels available
  • Available in a bright White color



Print Back