Extrutech Plastics, Inc.
5902 West Custer St.
Manitowoc, WI 54220
Phone: 920.684.9650
Fax: 920.684.4344
E-mail: info@epiplastics.com
Website:www.epiplastics.com
All Categories > Interlocking Wall and Ceiling Panels & Trims > P224 2 1/4 x 24 Inch Wide Partition Wall Panels > Item # P022618  


2 1/4 Inch Slip-On Corner

larger image

Item # P022618, 2 1/4 Inch Slip-On Corner

Extrutech 2 1/4" Slip-on Corner, Item # P022618, is used as one of two corner options of the Extrutech Partition Wall System. This corner trim allows the corner to be slipped over the sides of standing panels where clearances are tight. Is of an exterior grade, hard, dense, rigid pvc, with a smooth surface, and has a 0.65" wall thickness. Cut with standard power saw and a fine tooth blade. Fasten with appropriate trim screws and construction adhesive per installation instructions or industry standard. This product is non-painted, available in white, at 9' and 18' foot lengths, with a weight of 0.4 lbs per foot. Page Link: ( Details ), ( Installation Video )





Specifications  · Additional Information

Specifications

Width
2.25 Inch

Panel Design
Slip-On Corner

Available Lengths
18 ft
9 ft
Cut to the Inch

Color1
White

Weight
0.40 lb/ft

Thickness
0.065 Inch
1 A 20% charge will be added for custom cuts, and /or colors. Volume discounts are available.


Additional Information

The P224 Partition Wall Panel allows numerous design options. A wall thickness of 2 1/4" which allows for an insulation option that provides a (R-10). Cut to the inch panel lengths or based on your requirements, with door and window cut-out options. This user friendly panel also allows for easy field cuts if needed and its tongue and groove design makes for quick installation.



Print Back