Extrutech Plastics, Inc.
5902 West Custer Street
Manitowoc, WI 54220

Toll Free: 888.818.0118
Phone: 920.683.5201
Cell: 920.323.3312
Email: info@epiplastics.com
Website: www.epiplastics.com
Print Back
Extrutech 2 1/4" Slip-on Corner, Item # P022618, is used as one of two corner options of the Extrutech Partition Wall System. This corner trim allows the corner to be slipped over the sides of standing panels where clearances are tight. Is of an exterior grade, hard, dense, rigid pvc, with a smooth surface, and has a 0.65" wall thickness. Cut with standard power saw and a fine tooth blade. Fasten with appropriate trim screws and construction adhesive per installation instructions or industry standard. This product is non-painted, available in white, at 9' and 18' foot lengths, with a weight of 0.4 lbs per foot.
Unit of Measure

Specifications

Width

 N/A 2.25 Inch

Panel Design

 N/A Slip-On Corner

Available Lengths

 N/A 18 ft9 ftCut to the Inch
Color1 N/A White

Weight

 N/A 0.40 lb/ft

Thickness

 N/A 0.065 Inch

Additional Information

Additional Information

 N/A The P224 Partition Wall Panel allows numerous design options. A wall thickness of 2 1/4" which allows for an insulation option that provides a (R-10). Cut to the inch panel lengths or based on your requirements, with door and window cut-out options. This user friendly panel also allows for easy field cuts if needed and its tongue and groove design makes for quick installation.
  • 1 A 20% charge will be added for custom cuts, and /or colors. Volume discounts are available.