Extrutech Plastics, Inc.
5902 West Custer St.
Manitowoc, WI 54220
Phone: 920.684.9650
Fax: 920.684.4344
E-mail: info@epiplastics.com
Website:www.epiplastics.com
All Categories > Mouldings & Vacuum Tubing > Trim Mouldings > Item # C0100  


Window Sill 6.5 Inch Bullnose

larger image

Item # C0100, Window Sill 6.5 Inch Bullnose

Extrutech Window Sill, Item # C0100 is of an exterior grade, solid, dense, engineered polymer, with a smooth flat surface. 6"inches wide by 5/8" thick with a 1/2" thick bullnose face. Cut to length with standard powered miter saw. Fasten to wood with trim screws or construction adhesive. For masonry fasten with construction adhesive. Pre-primed in white or beige; ready for an acrylic latex based paint if needed. For use at the base of windows or as a wall cap and is available in 4'-16' lengths. Can be ripped to fit required width. Weight of 0.75 lbs per foot.






Specifications

Available Lengths

 View
10 ft
12 ft
14 ft
16 ft
8 ft

Color1
Beige
White

Material
Engineered Polymer

Standards
ASTM D3273
ASTM D3274

Additional Specifications2
1" Overall Face Depth by 3/8" Thick
5/8" x 6 1/2" Wide
Capstock Exterior
Closed Cell Structure
Excellent Impact & Skin Durability
Maximum Ultraviolet (UV) Protection
Primed
Resists Mold, Mildew
Salts and Insect Resistant
Will Not Absorb Water
1 A 20% charge will be added for custom cuts, and /or colors. Volume discounts are available.
2 A 20% charge will be added for custom cuts, and /or colors. Volume discounts are available.



Print Back