Extrutech 2 1/4" H-Bar Connector, Item # PH0224, is used to connect cut panels together, that have had their tongue or goove side of the panel cut off,such as for making a narrower panel to fit a required width. This H-Bar trim allows the trim to be slipped over the edge of a standard panel with a cut edge to anothr cut edge panel. Is of an exterior grade, hard, dense, rigid pvc, with smooth surface, and has a 0.65" wall thickness. Cut with standard power saw and a fine tooth blade. Fasten with appropriate trim screws or construction adhesive per installation instructions or industry standard. This product is non-painted, available in white, at 8' and 16' lengths, with a weight of 0.25 lbs per foot.
Extrutech Plastics, Inc.